Important Links

Herpstat HP (version 2)

$115.00

 

This non-proportional relay based thermostat was designed primarily for oil filled space heater control.  What sets this unit apart from other brands?  We included our safety relay feature so there is a backup component that can cut power should the primary power relay stick in the ON position.  Previously people had to use two thermostats inline for this type of protection.  We also have added additional sense circuitry that helps limit the electrical arc that wears relay contacts often resulting in 2 to 3 times longer relay contact life than other brand thermsotats. This unit can be used for heating, or cooling, or humidity control(with the optional humidity probe).  We have built in many of the typical Herpstat features such as High/Low tracking, built in adjustable night time temperature, ramping of temperature over time, audible alerts, and more.  The Herpstat HP includes a temperature probe with a 12 ft cord making it easy to find the right location to monitor your room temperature.  

 

This unit is specifically designed for room heating (oil filled heaters), cooling (box fans), or humidity.  This unit is not recommended for rack or cage temperature control.

The Herpstat HP comes with a temperature probe.

** Now with upgraded steel tipped probe ! **

Click here to check out the User's Manual

 

Full specs:

·High Powered ON/OFF style control of heating, cooling, or a humidity device. (usable range from 40F to 110F or 4C to 43C). 

·Temperature sensor included with an internal resolution of .1125 F and is accurate to ± .9 F

·Can be used with optional humidity sensor to control humidity instead of heating/cooling. 

·Can be used with optional humidity sensor for heating while monitoring humidity.

·Built in Safety Relay gives backup protection against a main relay failure causing a "run away" heating situation.

·Built in electrical tracking that typically improves relay contact life providing longer product life.

·User selectable temperature ramping.

·Sensor Matching allows the user to digitally calibrate the sensor output to match other equipment.

·Selectable day/night schedules with nighttime temperature setting.

·High/Low  tracking helps monitor heating system and enclosure efficiency.

·High/Low threshold alarms.

·Settings are retained in memory even if power is lost.  *

·Power Outage detection/tracking.

·Temperature can be set/displayed in Fahrenheit or Celsius.

·Easy to read backlit LCD display.

·12ft removable sensor allows for easy replacement if necessary.

·Audible alarm system.

·Internal error detection shuts off heat if sensor fails or is disconnected.

·Handles up to 1500 watts continuous / 1650 watts peak.

·Replaceable fuse.

·6ft electrical cord and grounded outlet

·1 year limited warranty

* Software clock is reset and features requiring the clock are disabled on power loss.


Add to Cart: